Speedo repair ?
Discussion
ewan221 said:
Anyone suggest an alternative to speedy cables? I'd rather not be without for the 4-6 months they seem to be taking at the moment.
Give these a call ,they referbed my Dads guages and there only up the road from me ..http://www.speedograph-richfield.com/
Edited by SILICONEKID340HP on Sunday 12th February 23:04
Edited by SILICONEKID340HP on Sunday 12th February 23:07
sparkythecat said:
What did you set the sensor gap at?
I ask, because my new sensor only worked at speeds over 30mph until I got the gap right. I used a feeler guage and set the gap at 6 thou'
I ask, because my new sensor only worked at speeds over 30mph until I got the gap right. I used a feeler guage and set the gap at 6 thou'
This, mine was the same. I thoroughly cleaned the wheel and sensor using solvents and used some fine emery paper on the toothed wheel. It was trial and error thereafter to get the "perfect" gap. Speedo works a treat now.They are very tempremental, the slightest bit of dirt etc can make them misbehave. Well worth a try cleaning everything.
TJC46 said:
This, mine was the same. I thoroughly cleaned the wheel and sensor using solvents and used some fine emery paper on the toothed wheel. It was trial and error thereafter to get the "perfect" gap. Speedo works a treat now.They are very tempremental, the slightest bit of dirt etc can make them misbehave. Well worth a try cleaning everything.

Haven't tried them but this firm had a good write-up in one of the classic mags.
http://www.caigauge.com/page21.html
http://www.caigauge.com/page21.html
Ho no sent mine off to Speedy Cables last month but I need it back as I'm going to Scotland at the end of March and need to get my car to the garage to sort an oil leak, sounds like I'll not get it back for July and France. I'll start chasing it now, if I knew it would be that long I would have looked at it myself and took a chance.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff



te at service !