Dashboard woe....pic needed...
Discussion
Well, some 'cheese of knob' has previously bodged the lower dash panel (radio bit) and has made a real hash of it...
....See picture below - the key to the pic is as follows...
RED CIRCLES - where one of the previous owner(s) had drilled through the panel and attached the panel with 2 screws to both of the switch assemblies...
BLUE CIRCLES - notice where the additional use of some 'stuff' has been used as an adhesive AND it made a right old mess!!
YELLOW CIRCLES - does anyone have a picture of what the bracket looks like??
Need pic of this please....

Thanks
Nosh.
....See picture below - the key to the pic is as follows...
RED CIRCLES - where one of the previous owner(s) had drilled through the panel and attached the panel with 2 screws to both of the switch assemblies...
BLUE CIRCLES - notice where the additional use of some 'stuff' has been used as an adhesive AND it made a right old mess!!
YELLOW CIRCLES - does anyone have a picture of what the bracket looks like??
Need pic of this please....

Thanks
Nosh.
Hi,
my dash has been out for a while and is sitting on my desk. Hope these pics will help!
http://dl.dropbox.com/u/42674297/IMG_1098.JPG
http://dl.dropbox.com/u/42674297/IMG_1099.JPG
http://dl.dropbox.com/u/42674297/IMG_1100.JPG
http://dl.dropbox.com/u/42674297/IMG_1102.JPG
http://dl.dropbox.com/u/42674297/IMG_1103.JPG
http://dl.dropbox.com/u/42674297/IMG_1104.JPG
http://dl.dropbox.com/u/42674297/IMG_1105.JPG
http://dl.dropbox.com/u/42674297/IMG_1106.JPG
http://dl.dropbox.com/u/42674297/IMG_1107.JPG
my dash has been out for a while and is sitting on my desk. Hope these pics will help!
http://dl.dropbox.com/u/42674297/IMG_1098.JPG
http://dl.dropbox.com/u/42674297/IMG_1099.JPG
http://dl.dropbox.com/u/42674297/IMG_1100.JPG
http://dl.dropbox.com/u/42674297/IMG_1102.JPG
http://dl.dropbox.com/u/42674297/IMG_1103.JPG
http://dl.dropbox.com/u/42674297/IMG_1104.JPG
http://dl.dropbox.com/u/42674297/IMG_1105.JPG
http://dl.dropbox.com/u/42674297/IMG_1106.JPG
http://dl.dropbox.com/u/42674297/IMG_1107.JPG
...sorry - forgot to say...which other side do you need? I can't supply a pic of the one missing bracket far left by the hazard switch as mine is missing there too!
The brackets appear to just be bonded on with some sort of Araldite adhesive stuff. They certainly don't use any screws and there are no visible marks on the front side on the panel.
The brackets appear to just be bonded on with some sort of Araldite adhesive stuff. They certainly don't use any screws and there are no visible marks on the front side on the panel.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


