Fuel tank

[SILICONEKID340HP]

Can i change the fuel pipe flow from the tank without removing it ..Decided to change it ,looks a bit crusty.

If so how does it come out ?

[MADMAX2]

just silicon seal it

[SILICONEKID340HP]

MADMAX2 said:

just silicon seal it

Anything more constructive !replaced all the others flow ,return ,front and rear ,just got the one from the petrol tank to do ..

Not to bothered about the breather pipe so left that alone ..

[TVR Beaver]

are you talking about the tank to pump one?... if so, just dig out the Silicon in the rear wheel arch... it covers the clip... I could get on mine and replace the pipe... but I understand others are not as lucky?....

[SILICONEKID340HP]

TVR Beaver said:

are you talking about the tank to pump one?... if so, just dig out the Silicon in the rear wheel arch... it covers the clip... I could get on mine and replace the pipe... but I understand others are not as lucky?....

Yes but i need to disconnect from the tank but don`t fancy removing the tank cheers

[TVR Beaver]

thats what I'm talking about... the tank outlet is just behind the hole so once you remove it youre onto the tank's solid pipe.... as I say, I got my clip off okay as the tank and hole in the body were good... but if its to one side and you can't remove the clip.. then you will at least have to move the tank about a bit.....

[Barreti]

Once you've dug out all the old silicone filling the hole and covering the connection to the tank, if you still can't get at the hose clip and need to take the tank out you have already done the worst job.