clear lens

[v8kev]

just doing some jobs while weathers good decided on clear lenses done side repeaters quite easy removed old orange front indicators easy but when it came to getting them to stick to the body tried sikoflex would,nt stick so tried evo stick grab adhesive and stuck lenses on first left over night there stuck but not overly solid then screwed on caps which twists wires is this the way or do you offer up complete light and sit there holding for an hour maybe wrong adhesive?

[estutjaweh]

I wired and screwed the lamp together, then sikoflexed it into position wedging it there overnight with rags and such. Its held up perfectly.

[SILICONEKID340HP]

v8kev said:

just doing some jobs while weathers good decided on clear lenses done side repeaters quite easy removed old orange front indicators easy but when it came to getting them to stick to the body tried sikoflex would,nt stick so tried evo stick grab adhesive and stuck lenses on first left over night there stuck but not overly solid then screwed on caps which twists wires is this the way or do you offer up complete light and sit there holding for an hour maybe wrong adhesive?

I have the clear type ,got to say they are poor quality next to the OE ones..

Ist here any good quality clear ones on the market with the proper fixing clip ..if you stikaflex it how you going to change the bulb in the future.?

[v8kev]

unsrew the cap at the rear of indicator and pull through front grill and change bulb job done