what is the best setting for the GAZ gold pro??and geo???

[V8FROG]

as the title says.i got my GAZ gold pro.will install them pretty soon.was wondering what is the best setting possible.hight etc...how about the geo??do u guys have the numbers for the geo??/tks ps i dont care too much about comfor and want ma car to stick to the road!!

[V8FROG]

people told me front/rear camber=-0 degree 50min +-10min,front/rear toe=+degree to 12 individual.got no idea what it meens.does it sound correct to u??/tks

[bobfather]

At standard ride height

Rear
1.4 degrees neg camber
1.5mm toe in per side (12 minutes)

Front
3/4 of degree of neg camber
0.75mm toe in per side (6minutes)

Settings from Derek at Gaz Shocks

[haircutmike]

Set the ride height as measured under the triangular gusset pieces at the outrigger corners.

Front, 140mm
Rear, 160mm

Set the damper settings at half way, (say 10 out of 20 clicks for example) and add about 2-3 clicks for added stiffness to the front.

Take for a spirited drive down a known bumpy twisty road.

If it feels too firm, back off 2 clicks all round.

If it feels too soft, add another 2 clicks all round.

Test over the same section of road.

Good luck!

[Naybr]

I've jsut fitted them and was given some 'starter' settings of 12 clicks (from soft) on the front and 10 clicks on the back.

I have to say I'm delighted with the results!

[V8FROG]

guys tks a lot for ur help.will let u know by next week!!!the only TVR with GAZ in the whole malaysia ahahaha