How much Engine Oil do I need?
Discussion
pjac67 said:
5 litres should do it, although put in 4 - 4.5 and check to be on the safe side...
No way 



Edited by Simon says on Friday 13th April 14:28
michielp said:
About 6,8 l.
Just did the oil change last week and it took almost 7 liters.
Included was the prefill of the oil filter. and i filled it up to the max at the dipstick.
so don't buy to little oil as i did and had to order another liter to fill her up correctly.
Same here. '93 Griff 500. Takes almost 7 quarts or thereabouts after a good 30 min sump drain when hot and refilling the new filter before screwing it on. Fill the filter slowly as it'll take a few seconds after each pour for the oil to absorb into the filter media but it'll hold almost a quart all said and done so if you have 7 qts on hand, you'll be good to go. Just did the oil change last week and it took almost 7 liters.
Included was the prefill of the oil filter. and i filled it up to the max at the dipstick.
so don't buy to little oil as i did and had to order another liter to fill her up correctly.
Belle427 said:
Nice thread resurrection.
On the pre serp is it a case of just drain and refill as usual or are there issues with the oil pump?
No problem if you drain and refill but do fill the filter before you fit it. If you drain and leave it drained then you will need to prime the pump. Don't ask me how long you can leave it as I have not risked finding out.On the pre serp is it a case of just drain and refill as usual or are there issues with the oil pump?
If we do an engine rebuild or cam then we prime. If we are starting a car that has been asleep in someone's garage we prime.
Steve
Gassing Station | Chimaera | Top of Page | What's New | My Stuff