door end cappings

[v8kev]

does anyone know how to get these door end capping rubbers to fit there at the top of the door as you open it tried to offer them up but dont seem very keen to stay there and even with good adhevise not sure

[Mark.]

You talking about the rubber bit at the back of the window?

Glue never really worked, I drilled through and used a self tapper on each edge. Now I need to do the passenger side

[v8kev]

yes its the bit that goes on the end of the door at the top as you open it

[Mark.]

Self tappers then

[v8kev]

yep its seems like thats all that will hold them in place

[Mark.]

Stating the bleedin' obvious, but make sure the screw is not too long, the window is mighty close to where it goes through.

[v8kev]

yep noticed the window so quite small self tappers

[seeby]

Hi v8kev,before you start screwing those rubbers on ,why not try Gripfill adhesive out of the tube with a sealant gun ? Done mine about 4 years ago and still rock solid.Put a blob of glue on and tape it in place overnight to let it dry.;)