Lower ball joint
Discussion
Morning all, just a quick check before I hit buy, this is the correct part for a 1994 Chimaera lower passerger side ball joint:
http://www.ebay.co.uk/itm/Ball-Joint-Front-Lower-L...
This is the only MOT fail point after the car was laid up for 2 years. All electric gremlins have been resolved and therefore the car will be on the road for my 40th.
Many thanks,
MD
http://www.ebay.co.uk/itm/Ball-Joint-Front-Lower-L...
This is the only MOT fail point after the car was laid up for 2 years. All electric gremlins have been resolved and therefore the car will be on the road for my 40th.
Many thanks,
MD
I was really tempted by the cheaper ones but plenty of searchs came up with horror stories so I buckled
BIGMIKE1 said:
It looks the same but from what I've read they don't articulate as far, I didn't want to take the chance so I bought mine from race tech direct as they reckon they've had them specially made to suit
+1Let us know how it fits. I had a little trouble getting mine to sit in the wishbone properly and one other PHer did too - I did a thread on it a few months back. It seems the wishbone manufacture quality was at fault during the period I bought mine.
Normally less than a tenner from a motor factor. It's either a Saab 99 or Lada part (the top is one, bottom is t'other but I forget which way around it is!)
The 'modified' ones have had a little chunk ground out of the casting which otherwise won't clear the wishbone. You normally have to elongate the holes slightly too.
The 'modified' ones have had a little chunk ground out of the casting which otherwise won't clear the wishbone. You normally have to elongate the holes slightly too.
SILICONEKID340HP said:
tello said:
Had the same failure on mine late last year. Bought mine from Clevor Trevor for 36 pounds inc.VAT but 8.25 for postage. If the other side is ok I would not change it
I can`t beleive there is vat on postage 
Whats this country coming to !Phil
Gassing Station | Chimaera | Top of Page | What's New | My Stuff