Seat removal

[Mick Ord]

Whats the best ( easiest) way of removing the seats ?, do the slide out of there runners, or bolt out ?

thx

[brett84]

4 nuts underneath and lift straight out.
mine were a bit rusty so sprayed some plusgas on and left to soak. Also the rear one's were a bit fiddly as the bolt spun around. I just moved the seat forward and could get a socket on the nut underneath while having a spanner on the top

[Barreti]

Make sure you have the roof back section folded down. Its makes lifting them out easier.

This thread on refitting might be of interest.
http://www.pistonheads.co.uk/gassing/topic.asp?h=0...

[JonyTVR]

One the rears just span for me too after undoing most of the way, couldn't get a socket on ut though so just used a grinder to get it off, would always replace any bolts you undo on these cars, most of them are 10-20 yrs old and fibrglass corrodes them much quicker!