Indicator Clear lenses

[TVR500Morgan]

Hi does anyone have or know of any clear indicator lenses for sale ? front lenses and side repeaters. Thanks Calvin

[Frenchda]

I need some of these as well

[TVR500Morgan]

That's what I want them for. I'm struggling to find any though, I thought maybe someone on here may have had some.

[ewan221]

clear side ones from ebay £10.99

http://www.ebay.co.uk/itm/160692291638

perfect fit

[SILICONEKID340HP]

TVR500Morgan said:

Hi does anyone have or know of any clear indicator lenses for sale ? front lenses and side repeaters. Thanks Calvin

These are the babies mate ,got mine from the same seller.

http://www.ebay.co.uk/itm/MILITARY-INDICATOR-LENS-...

You can get the cheap side indicators from Fleabay but they stick on ,there not very good quality..

Think Racetech sell quality one`s but there expensive.

[TVR500Morgan]

Thanks guys

[FlipFlopGriff]

Side repeaters are standard Ford oval items. About £10 a pair.
FFG

[Dodsy]

SILICONEKID340HP said:

These are the babies mate ,got mine from the same seller.

http://www.ebay.co.uk/itm/MILITARY-INDICATOR-LENS-...

You can get the cheap side indicators from Fleabay but they stick on ,there not very good quality..

Think Racetech sell quality one`s but there expensive.

I bought some of these too, looks much nicer now. Dont forget to buy some mirrored bulbs to go with them

[JPW231]

How difficult were the front indicator lenses to fit?

[SILICONEKID340HP]

JPW231 said:

How difficult were the front indicator lenses to fit?

Not to bad ,just take your time ,i managed to break the bits at the back but i managed to get hold of some for peanuts.

I used sitkaflex and left it over night.

military lights

[JPW231]

Are thy originally bonded in, or do they just unscrew? Think I need some sikaflex rather an te bathroom sealant I bought!

[TVR500Morgan]

Pretty easy to do just time consuming. Use sikaflex as Darren says anything else and they just fall out again.

[Dodsy]

I used tiger seal. Stuck a piece of wood in front of the old lenses then tapped with a hammer to knock them out. Pull through the front grille, unscrew old lens, screw new ones on then hold in place with a bead of tiger seal around them to fix in place.

Masking tape across the lens to the body to hold in place while the tiger seal sets, job jobbed.

[SILICONEKID340HP]

Dodsy said:

I used tiger seal. Stuck a piece of wood in front of the old lenses then tapped with a hammer to knock them out. Pull through the front grille, unscrew old lens, screw new ones on then hold in place with a bead of tiger seal around them to fix in place.

Masking tape across the lens to the body to hold in place while the tiger seal sets, job jobbed.

Tiger seal is the same stuff !