Stepper motor and spare key
Stepper motor and spare key
Author
Discussion

disco bob

Original Poster:

261 posts

276 months

Tuesday 17th August 2004
quotequote all
Read through the bible last night and i think i need to give my stepper motor a clean,i have located where it is,what size spanner do i need as i don`t think i have one big enough and what shall i clean it with.

I need a spare key cutting,can i get one anywhere or do i need to go somewhere specific.
cheers disco bob.

madant69

847 posts

276 months

Tuesday 17th August 2004
quotequote all
I cleaned the gunk off my stepper with white spirit and it worked fine - I removed it using a large adjustable spanner (it was a little more than finger tight and came out easily). The problem was actually the ignition amp though, so it didn't actually help

chris_chim

207 posts

266 months

Tuesday 17th August 2004
quotequote all
In terms of the key, many key cutters do not have the appropriate machine so you may need to ask around a bit but it is a standard Vauxhall key so you should find one locally.
I use meths to clean the stepper motor and have a big adjustable spanner to get it off. This is cheap and worth having in the car anyway as can be used for all sorts of things (banging in tent pegs etc).

robertp

983 posts

290 months

Tuesday 17th August 2004
quotequote all
And be careful not to over-tighten - I did and broke it - £90 down the drain!!

Big Al.

69,336 posts

287 months

Tuesday 17th August 2004
quotequote all
disco bob said:
what size spanner do i need


32mm, on mine.

disco bob

Original Poster:

261 posts

276 months

Tuesday 17th August 2004
quotequote all
Borrowed one off the engineers hope i remember to give it them back .
There you go dodger

>> Edited by disco bob on Wednesday 18th August 06:49

the dodger

2,376 posts

292 months

Tuesday 17th August 2004
quotequote all
disco bob said:
Borrowed one of the engineers


Hope you remember to give him back.