Discussion
2 sMoKiN bArReLs said:
Don't help you at all Daz, but I've got an accumate lead that comes out by the battery box. I fitted a cigar multiplug on it that sits under the dash. TomTom etc comes from that side & is spot on.
Actually, that's a really good idea. I may well copy that as it means there's a plug for a trickle charger and another socket to charge things... CheersI dropped a couple of these behind the dash for my TomTom and RoadAngel...
http://www.ebay.co.uk/itm/160802002588
They work very well (fed them from the ignition switched feed that goes to the headlight switch) ... don't charge an Apple device as they need a link making across the USB connectors but they chrge anything else that uses USB.
Phil
http://www.ebay.co.uk/itm/160802002588
They work very well (fed them from the ignition switched feed that goes to the headlight switch) ... don't charge an Apple device as they need a link making across the USB connectors but they chrge anything else that uses USB.
Phil
SILICONEKID340HP said:
2 sMoKiN bArReLs said:
Don't help you at all Daz, but I've got an accumate lead that comes out by the battery box. I fitted a cigar multiplug on it that sits under the dash. TomTom etc comes from that side & is spot on.
Where can i get the adapter .
2 sMoKiN bArReLs said:
SILICONEKID340HP said:
2 sMoKiN bArReLs said:
Don't help you at all Daz, but I've got an accumate lead that comes out by the battery box. I fitted a cigar multiplug on it that sits under the dash. TomTom etc comes from that side & is spot on.
Where can i get the adapter .
Phil
They are Tamiya connectors and you can buy them like this to make up what you want http://www.ebay.co.uk/itm/RC-R-C-7-2v-Tamiya-Batte... they are often referred to as Tamiya charger connectors i.e those remote control cars sad b
ds own
or there is this ready made http://www.ebay.co.uk/itm/Optimate-3-4-Accumate-Ci...
ds own
or there is this ready made http://www.ebay.co.uk/itm/Optimate-3-4-Accumate-Ci...Edited by Simon says on Saturday 27th October 19:01
I must admit the location of the socket is a PITA as far as TomTom is concerned. I was passenger less on this years Le Mans trip and having to get out at the tolls - tripping over the bloody cable - again - with my mate behind 'beeping' (at every toll - it did wear a bit thin after a while
) me as he sat on his fat arse in his crusty Vectra 
As a direct result of this I will be adding a new charger point wired in parallel from the existing power supply, it shouldn't be too difficult to trace back from the door once the carpet is unpeeled.
) me as he sat on his fat arse in his crusty Vectra 
As a direct result of this I will be adding a new charger point wired in parallel from the existing power supply, it shouldn't be too difficult to trace back from the door once the carpet is unpeeled.
Bassfiend said:
2 sMoKiN bArReLs said:
SILICONEKID340HP said:
2 sMoKiN bArReLs said:
Don't help you at all Daz, but I've got an accumate lead that comes out by the battery box. I fitted a cigar multiplug on it that sits under the dash. TomTom etc comes from that side & is spot on.
Where can i get the adapter .
Phil
2 sMoKiN bArReLs said:
Bassfiend said:
2 sMoKiN bArReLs said:
SILICONEKID340HP said:
2 sMoKiN bArReLs said:
Don't help you at all Daz, but I've got an accumate lead that comes out by the battery box. I fitted a cigar multiplug on it that sits under the dash. TomTom etc comes from that side & is spot on.
Where can i get the adapter .
Phil

cheers ..just bought the adapter from Tamiya to cigar lighter ,going to hide it in the glove sleeve thingy .
Just been trawling through the draws to find a 3 meter length of cable with a plug in cigar (male connector)im going to connect the Taniya connctor to the end for the accumate ..job done thanks for your help.
Just been trawling through the draws to find a 3 meter length of cable with a plug in cigar (male connector)im going to connect the Taniya connctor to the end for the accumate ..job done thanks for your help.
SILICONEKID340HP said:
cheers ..just bought the adapter from Tamiya to cigar lighter ,going to hide it in the glove sleeve thingy .
Just been trawling through the draws to find a 3 meter length of cable with a plug in cigar (male connector)im going to connect the Taniya connctor to the end for the accumate ..job done thanks for your help.
Just been trawling through the draws to find a 3 meter length of cable with a plug in cigar (male connector)im going to connect the Taniya connctor to the end for the accumate ..job done thanks for your help.
SILICONEKID340HP said:
cheers ..just bought the adapter from Tamiya to cigar lighter ,going to hide it in the glove sleeve thingy .
Just been trawling through the draws to find a 3 meter length of cable with a plug in cigar (male connector)im going to connect the Taniya connctor to the end for the accumate ..job done thanks for your help.
Just double check you got the polarity correct before you try it though Daz if you are using one of those loose terminal make up kits Just been trawling through the draws to find a 3 meter length of cable with a plug in cigar (male connector)im going to connect the Taniya connctor to the end for the accumate ..job done thanks for your help.
not trying to teach you to suck eggs or anything 
SILICONEKID340HP said:
Can the cables be traced back and re used in a better position close to the glove compartment ? if not where can i pick up a 15amp supply ,don`t want to come off the battery .
Im sick and tired of the Tom Tom cable .
Im sick and tired of the Tom Tom cable .
You got a glove compartment?All I got was a leather envelope

Simon says said:
SILICONEKID340HP said:
cheers ..just bought the adapter from Tamiya to cigar lighter ,going to hide it in the glove sleeve thingy .
Just been trawling through the draws to find a 3 meter length of cable with a plug in cigar (male connector)im going to connect the Taniya connctor to the end for the accumate ..job done thanks for your help.
Just double check you got the polarity correct before you try it though Daz if you are using one of those loose terminal make up kits Just been trawling through the draws to find a 3 meter length of cable with a plug in cigar (male connector)im going to connect the Taniya connctor to the end for the accumate ..job done thanks for your help.
not trying to teach you to suck eggs or anything 

Goaty Bill said:
SILICONEKID340HP said:
Can the cables be traced back and re used in a better position close to the glove compartment ? if not where can i pick up a 15amp supply ,don`t want to come off the battery .
Im sick and tired of the Tom Tom cable .
Im sick and tired of the Tom Tom cable .
You got a glove compartment?All I got was a leather envelope

Gassing Station | Chimaera | Top of Page | What's New | My Stuff





