Towing a chim?
Discussion
Discopotatoes said:
Sardonicus said:
No Peter, it will be fine as the diff is just freewheeling and still be lubricated same as the output shaft on the gearbox.
Just make sure your input shaft is lubricated before locating in dolly, make sure the tranny is lubricated before it enters your output shaft 
and dont get ya planetary gears lodged inside. 
I knew a guy who towed his 4X4 L/R racer on a dolly, half way up the M5 the rear pinion bearing heated up and sized due to the lack of oil, after he always drop the prop, pulled the half shafts and fitted blanking plates, I know you can not do this with a TVR but though I would add a comment. I would try and make the location of the front wheels high enough to clear obstacles while trying to maintain only a slight inclination, some of these dolly’s seem to have the car at 30° plus, just my pennies worth.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff








!

