Clutch question

[Tri2Tri]

Chaps.

I understand some have used JE engineering for your clutch parts. I googled the firm and spoke with a helpful irish chap who was unsure about my requirements regarding the TVR as they had not done one for quite a few years......Have I got the right company? Anyone who has used this firm or something sounding similar could you please post a web link/contact details so I can get my parts ordered. The car is a 4.0 Chim. so I take it a standard clutch assembly for that car would do the trick unless others could suggest alternatives/upgrade. The car will remain pretty much standard with no massive power improvements planned.

[db418BHP]

No you got the 'other' guys.

You want John Eales here http://www.johnealesroverv8.co.uk/

[Tri2Tri]

Cheers....lol.

[Tri2Tri]

Search is down for second day running Im sure it was Silicone Kid who posted a response to a clutch question some time ago in regards to an upgraded version from John Eales. It was something like a 340lb/ft upgrade that had little to no impact on every day use ie. clutch was still light enough to operate in stop start traffic. Does anyone have a link to that thread or maybe able shed more light on it before I order my clutch from john eales.......Cheers.

[LongBaz383BHP]

Have a look on the AP site. They will have what you are looking for. £369 inc VAT

[LongBaz383BHP]

Have a look on the AP site. They will have what you are looking for. £369 inc VAT

[StarmistBlue400]

db418BHP said:

No you got the 'other' guys.

You want John Eales here http://www.johnealesroverv8.co.uk/

Miles cheaper to get one from John than anywhere else. If they also offer a lightened and balanced flywheel on advance exchange if required.

[TVR Beaver]

StarmistBlue400 said:

Miles cheaper to get one from John than anywhere else. If they also offer a lightened and balanced flywheel on advance exchange if required.

+1.. get it from John... you'll save around £60

[SILICONEKID350HP]

These are the part numbers for the 340ftLB clutch ,you can get one rated at 270ftLB.

Pressure Plate/Cover Plate: CP2394-14

Friction Plate: CP2346-4



your prices are as follows

1/ CP 2394-14 £171.52 + VAT IN STOCK

2/ CP2346-4 £115.03 + VAT TO ORDER.

[e-mail]

These clutches are identified with a green mark on both the clutch plate etc




When i spoke to John Eales about a sending me replacement clutch, he said the one listed above was the strongest available without going back to a paddle clutch.

Edited by SILICONEKID350HP on Wednesday 20th February 13:28

[Tri2Tri]

Thanks fellas....Just what I was after.