Track rod ends
Track rod ends
Author
Discussion

jojackson4

Original Poster:

3,049 posts

167 months

Saturday 13th April 2013
quotequote all
What are they off and best ones to get
Just been for 4 wheal setup and there abit shaged so some new one are in order and then back for setup

Andav469

966 posts

167 months

Saturday 13th April 2013
quotequote all
Any of the usual TVR outlets have them in stock, about £12 per side, wile your doing the Track Ends, have a look at the Steering rack gaitors, a 2 minute job each side of the track ends are off

chris1972

3,597 posts

167 months

Saturday 13th April 2013
quotequote all
Got two yesterday from Clever Trevor.

http://www.clever-trevor.net/TVR/Search_details/H0...

One of mine is knackered, the other is fine, but have decided to replace both on advice from here. I checked my PAS gaitors and they're pretty solid, so decided not to go down that route due to cost, albeit sound advice in many cases. I purchased a balljoint splitter from Amazon, although many on here split wih a hammer. It's another job backing-up on my list!

See my link from the other day

http://www.pistonheads.com/gassing/topic.asp?h=0&a...

This is what mine looks like.


jojackson4

Original Poster:

3,049 posts

167 months

Saturday 13th April 2013
quotequote all
Mine are ok but are a bit secede up on the adjustment so some heat will be required so I'm going to replace

carsy

3,019 posts

195 months

Saturday 13th April 2013
quotequote all
http://www.pistonheads.com/gassing/topic.asp?h=0&a...

This part number for Escort Mk.2 also fitted my 1992 Precat, non pas.

chris1972

3,597 posts

167 months

Saturday 13th April 2013
quotequote all
Damn,,, wish you had posted this before!!!

http://www.ebay.co.uk/itm/TRACK-TIE-ROD-END-PAIR-f...