Otter switch
Otter switch
Author
Discussion

glynlucas

Original Poster:

63 posts

277 months

Sunday 3rd October 2004
quotequote all
My thermostatic switch has stopped working! No warning just a sudden overheating experience. Any recommendations about purchasing a replacement?

(Talking of which, where have all the alternative parts lists gone? I can't find any and Google used to return at least three.)

Finally, my old one, when working used to cut in at about 95 degrees. I was going to get a lower temp replacement. Does this sound like the best plan?

Thanks.

joospeed

4,473 posts

307 months

Sunday 3rd October 2004
quotequote all
You can replace with the original type, or lower rated temp for use with a lower temp thermostat, or go for an adjustable temp switch so you set it yourself ( my preferred option)

joo

count duckula

1,324 posts

303 months

Monday 4th October 2004
quotequote all
When my otter went I got the varible one from modwise, well worth it, I have it set to come on at about 80.


Malc

shnozz

30,632 posts

300 months

Monday 4th October 2004
quotequote all
I got the leven cooling kit which includes the lower temp otter switch, thermostat and water wetter. Since fitting, the temp doesnt raise about 70 on the move and sits dead on 90 in stop start traffic. brilliant

david beer

3,982 posts

296 months

Monday 4th October 2004
quotequote all
An adjusable stat on the outlet of the rad will be much quicker to bring the fans on than the otter on the input.

GreenV8S

31,017 posts

313 months

Monday 4th October 2004
quotequote all
david beer said:
An adjusable stat on the outlet of the rad will be much quicker to bring the fans on than the otter on the input.


This works a lot better because you only really want the fans on when you don't have enough ram air feed through the rad. The rad outlet temperature shoots up when you don't have enough ram, so this is an ideal signal to control the fans. An otter switch in the top hose doesn't bring the fans in until the engine has started to overheat, and doesn't switch off again until it has cooled down regardless of how fast you are moving.

You do need to remember that the bottom hose runs cooler than the top hose so you need to set the otter to a lower temperature. (I normally set mine at 65 and 70 deg.)

Wander

24 posts

264 months

Tuesday 5th October 2004
quotequote all
Out of interest, how accurate are the temperature gauges?
I was sceptical when I bought my Chimp as the owner said he'd had problems overheating and that having relaced the otter. It's normal temp is 70-75 and doesn't get above 90 in stationary traffic. I assumed the gauge was just rubbish and in fact the temp was nearer 100-110 but maybe I've go the lower temp otter?

shnozz

30,632 posts

300 months

Tuesday 5th October 2004
quotequote all
Wander said:
Out of interest, how accurate are the temperature gauges?


in my experience, not very.