93%

[LongBaz383BHP]

Just playing with my rover gauge and it appears I am only getting 93% full throttle opening. How would you adjust that. Does the gauge work on the butterfly or on the cable/pedal.
Thanks for any help
Barrie

does this mean I will get 7% more power

The other thing it identified was that a lambda sensor wasnt working, so replaced that, now it is not running lean. Is this just fluke,even more

Edited by LongBaz383BHP on Saturday 6th July 12:46

[jojackson4]

I think it works of the TPS get he multi meter out and see what you get with it at idle 0.32-0.34 volts is what your looking for
Green & blue-v if its a serp

[GasMunkey]

You need to enlarge the2 screw holes slightly on the tps on the side of the plenum to give it a tiny bit of adjustment

[Sardonicus]

Make sure your getting full throttle 1st i.e the cable dont need adjusting.

[db484bhpv8]

Press harder on the pedal

[jamienshelly]

"I am pressing the bloody pedals as hard as I can, but I am only getting 93% air flow.
Do you think my filter may be blocked?

[Sardonicus]

But have you tried getting full throttle working the linkage with your hand rather than via the cable/your foot?

[LongBaz383BHP]

Thanks for the suggestion. Just in from work, on the beer and vino now so will give that a try tomorrow. How do think about the lean running and the new lambda sensor.
Barrie, summer 'Corona & Black Stump' happy days

[Wicker Man]

jamienshelly said:

Do you think my filter may be blocked?

Worth checking if you have any doubt - despite a FSH, you may find it covered in 'tar and feathers'. Slice of the thickest crud, wash it in hot soapy water and re-oil it.
Also worth checking that the wire gauze in the AFM doesn't have 14 years of accumulated insects stuck to it.