Securing Light Bezel

[KSV]

Hi All
Can anyone tell me the best adhesive to use to fix the light bezel to the body, mine flew off yesterday but luckily was able to retrieve it. Looks like Sikaflex was used before.

Regards Colin

[Andav469]

Sikaflex/Tigerseal is your best bet

[canonc]

CT1 in black.

[KSV]

Thanks Guys

[Dodsy]

It should be secured with a bolt or 2 accessed from behind via the front grille IIRC , sikaflex just helps it stop moving around it shouldnt be the only thing holding it in

[QBee]

+1
2 bolts underneath the flat part, and a big dob of sikkaflex at the top

[KSV]

No Bolts as had Lupo light conversion.

Colin

[QBee]

KSV said:

No Bolts as had Lupo light conversion.

Colin

Which of course you mentioned at the start.....

[canonc]

Google CT1 I have used it on various jobs on mine, with no problems.

[KSV]

Many Thanks Canonc. Will take a look.

[phazed]

KSV said:

No Bolts as had Lupo light conversion.

Colin

My Lupos still retain the 2 bolts to each side, you probably have new bezels.

[KSV]

Looks like the bolts were broken off and not much adhesive applied just two blobs at the bottom when it could have been loaded with adhesive to hold them, need something to hold them and not have to worry about them flying off again. Think I will try the CT1.

[Dodsy]

This is what you want. TVRs are held together with this - Its what holds on my rear light covers , windscreen surround/trim, front indicators and headlight covers.

http://www.amazon.co.uk/Sikaflex-caravan-motorhome...

[KSV]

Thanks Dodsy, just what I was looking for. Will order tomorrow.


Regards Colin

[Dodsy]

Just make sure you wear gloves and mask up the car , sikaflex is very sticky and takes days to get off skin! I speak from experience.

[KSV]

Thanks again. Just ordered.