Chimaera 400 water pump
Discussion
Pre serps are different.....
Typically you can get pattern parts from Rover Sd1's and cut down the nose, or try and get suitable parts via TVR Power or the like. Unlike the serps which all use the same pump, the pre-serp pumps were not used on LR's just SD1's, MG's, Triumph, Morgan... and even then variations with the nose which was designed for a viscous coupling (fan).
Typically you can get pattern parts from Rover Sd1's and cut down the nose, or try and get suitable parts via TVR Power or the like. Unlike the serps which all use the same pump, the pre-serp pumps were not used on LR's just SD1's, MG's, Triumph, Morgan... and even then variations with the nose which was designed for a viscous coupling (fan).
myfirstchimaera1 said:
Thanx guys,looked on Rimmer Bros site,so many different ones, eventually found the correct one and at £130.00 ish, getting to be a expensive hobby now,£800 in the last 6 weeks,an still no closer to booking it in for a mot
They normally do a third party one that is cheaper. As I said, give them a ring, it is normally quicker!Gassing Station | Chimaera | Top of Page | What's New | My Stuff



