Dyno run tomorow
Discussion
Bobgriff said:
I did mine last week and managed 335 and 351 torque, was with the help of some Mark Adams fettling, before that it was woeful! Good luck, hopefully you get what you want otherwise you could be going down a slippery slope as I did.
At the wheels ? If so, thats very good.... Decatted ?edo said:
Not sure why I looked at that! Mine is on the rollers on Tuesday.....glow worm said:
At the wheels ? If so, thats very good.... Decatted ?
No, if only! That's at the fly on the Mech Repairs RR in Cheltenham. M Adams calculations then bring it up to those figures. The engine is a Taraka in good health, decatted with larger injectors and AFM. I'm not overly hung up on max power, just want the best balance possible between best driving characteristics and (ok...power!). Seems to work well and at whatever power it's ever put out it's always out performed my limited abilities. They are beasts whatever the power.glow worm said:
At the wheels ? If so, thats very good.... Decatted ?
No, if only! That's at the fly on the Mech Repairs RR in Cheltenham. M Adams calculations then bring it up to those figures. The engine is a Taraka in good health, decatted with larger injectors and AFM. I'm not overly hung up on max power, just want the best balance possible between best driving characteristics and (ok...power!). Seems to work well and at whatever power it's ever put out it's always out performed my limited abilities. They are beasts whatever the power.Gassing Station | Chimaera | Top of Page | What's New | My Stuff



.



;)