Discussion
Afternoon chaps. Bit of advice needed as I get a graunching/clunking noise from the diff/half shafts when I reverse. Its enough to make your nob go counter sunk. Fairly sure its the diff. Has anyone else had this and how did you resolve it.
Barrie
Barrie
Edited by LongBaz383BHP on Sunday 8th December 16:13
Hi Baz, check the prop-shaft is not rubbing on the ex silencer 
they run a tad close and most show witness marks 
also check the prop UJ's by giving it a firm twist left to right no play should be present, CV joints generally thump/bang on brisk acceleration (old age/wear and tear) or crunch and rattle if the grease leaked out/dried out neglected 
just a thought check the road wheel nuts are tight too along with CV bolts prop bolts etc 
they run a tad close and most show witness marks also check the prop UJ's by giving it a firm twist left to right no play should be present, CV joints generally thump/bang on brisk acceleration (old age/wear and tear) or crunch and rattle if the grease leaked out/dried out neglected just a thought check the road wheel nuts are tight too along with CV bolts prop bolts etc Edited by Sardonicus on Sunday 8th December 16:19
Gassing Station | Chimaera | Top of Page | What's New | My Stuff