New Chimaera Owner just brought 2 months ago

[andyallen]

This is my 1st TVR Chimaera Pearl Blue 4Ltr '97

Already fitted some ACT coolant pipes and have been cleaning bits inside engine bay and interior for the past 2 months

It's been a daily driver for 11yrs and has had no TLC whatsoever, labour of love I was told when you get one, I even spent 6hrs on Christmas day doing stuff to it, luckily the wife understands

Hope I've uploaded picture properly, will do the engine bay picture in the future

[loud430]

welcome andy, they are a good bunch on here,any questions just fire away, someone will have the answer.

[jojackson4]

Nice
What's the rigers like?
If it's been a daily get some
Wd40
Plus gas
Your going to have some sty bolts
But what else are you going to do when the soaps are on
Enjoy

[andyallen]

Only problem so far is that when I got it the interior fan worked, but just noticed that it's stopped blowing, any suggestions?

[jojackson4]

I haven't had that one but
1 fuse
2 hope it the fuse
3 fan has seized
4 duff wire/joint
Good luck

[QBee]

andyallen said:

Only problem so far is that when I got it the interior fan worked, but just noticed that it's stopped blowing, any suggestions?

1. You are aware it is push on/ push off? Took me about a week to work that one out.
2. There is a black control box, fag packet size, behind the dash. Multipin plastic terminal block connector. One wire usually burns out. Answer is to solder in a piece of cable to bypass the burnt out pin.
3. Give us more of a clue to your location and one of us coud probably help you fix it while meeting up for a chat, as you will need to take the dash top off if it's the wire. Jojackson could be right about the fuse etc. I only listed the ones I have actually had.
P.s. I have a chocolate working cocker.

Edited by QBee on Wednesday 1st January 22:51

[jojackson4]

QBee said:

andyallen said:

Only problem so far is that when I got it the interior fan worked, but just noticed that it's stopped blowing, any suggestions?

1. You are aware it is push on/ push off? Took me about a week to work that one out.
2. There is a black control box, fag packet size, behind the dash. Multipin plastic terminal block connector. One wire usually burns out. Answer is to solder in a piece of cable to bypass the burnt out pin.
3. Give us more of a clue to your location and one of us coud probably help you fix it while meeting up for a chat, as you will need to take the dash top off if it's the wire. Jojackson could be right about the fuse etc. I only listed the ones I have actually had.
P.s. I have a chocolate working cocker.

Edited by QBee on Wednesday 1st January 22:51

You got one of those posh ones
Mines from a caviller
My mate has 3 cockers for his shooting

[QBee]

Finally spotted your location on your website. There are quite a few experienced TVR owners in your area.