Where was the heated seats button?
Where was the heated seats button?
Author
Discussion

zed4

Original Poster:

7,248 posts

252 months

Tuesday 14th January 2014
quotequote all
Hi,

I have a heated seat retrofit kit for my Chim which I want to get installed soon. Where did TVR fit the heated seat button, and what did it look like? I'd like to try and keep it as OEM as possible.

Thanks,

Dan

B17NNS

18,506 posts

277 months

Tuesday 14th January 2014
quotequote all
TVR offered heated seats?

Thought they only did gear knobs.

Goaty Bill

1,779 posts

181 months

Wednesday 15th January 2014
quotequote all
The GassedUpChimp has heated seats, so he will be able to answer this one for you.
I did know a long time ago, but as I don't have them, I have forgotten where/what the button goes/looks like.

What I would like to know; where did you get the kit from?

I could never understand is, how the original owner could spend all that money on gold badges (a good call all the same) and a few other optional bits, and not add heated seats at circa £250.
Always meant to have mine retro-fitted then just never got a roundtuit loser

Richard 858

1,882 posts

165 months

Wednesday 15th January 2014
quotequote all
I've pretty sure I've read in a previous thread that the button is to the left underside of the steering column, sort of opposite side of the boot release button, but don't have them fitted to mine & agree that if you're spending 35 grandish on a new convertible and they're an option why wouldn't you ??

Podie

46,649 posts

305 months

Wednesday 15th January 2014
quotequote all
Richard 858 said:
I've pretty sure I've read in a previous thread that the button is to the left underside of the steering column, sort of opposite side of the boot release button, but don't have them fitted to mine & agree that if you're spending 35 grandish on a new convertible and they're an option why wouldn't you ??
Some people only ever intended to use theirs in the summer?

Goaty Bill

1,779 posts

181 months

Wednesday 15th January 2014
quotequote all
I recall mine was more like 40 grandish with options.
So, £250 seems like being a bit tight at that point.

Like all cars, when you spec them, you also look at the re-sale value.
Hence why you rarely see a red Aston Martin, but the majority of Ferraris are red...

For example, dealers strongly advised against aircon for a Chimaera or Griffith, but insisted you needed it in a Cerbera. All about resale value.
It was around 1k for aircon IIRC.

A greater oddity was most pre-2000 500s would probably not have power steering. Whereas many/most 400s did (apparently).
Again dealer advice was that you didn't put PAS on a 500 as it robbed power, and owning a 500 was all about power.

Not sure how all that would stack up in a real world survey, but that was the general feeling amongst the 3 dealers I was speaking to.


zed4

Original Poster:

7,248 posts

252 months

Wednesday 15th January 2014
quotequote all
Richard 858 said:
I've pretty sure I've read in a previous thread that the button is to the left underside of the steering column, sort of opposite side of the boot release button, but don't have them fitted to mine & agree that if you're spending 35 grandish on a new convertible and they're an option why wouldn't you ??
Thanks. Ok, well I don’t fancy it being hidden up underneath there, I think I’ll try and fit them on either side of the centre console. Bit more accessible there.

Frank Smith

19 posts

236 months

Wednesday 15th January 2014
quotequote all
I have got factory fitted heated seats on my 450 and the button switch is located on the right hand side of the steering column just below the immobiliser slot. Hope this helps.

Frank Smith

19 posts

236 months

Wednesday 15th January 2014
quotequote all
I have got factory fitted heated seats on my 450 and the button switch is located on the right hand side of the steering column just below the immobiliser slot. Hope this helps.

zed4

Original Poster:

7,248 posts

252 months

Wednesday 15th January 2014
quotequote all
Frank Smith said:
I have got factory fitted heated seats on my 450 and the button switch is located on the right hand side of the steering column just below the immobiliser slot. Hope this helps.
Interesting, thanks. I presume it’s one button for both seats then? My kit has 2 buttons, one for each seat.

Richard 858

1,882 posts

165 months

Wednesday 15th January 2014
quotequote all
zed4 said:
Interesting, thanks. I presume it’s one button for both seats then? My kit has 2 buttons, one for each seat.
I'd be interested in the details of your kit, once your happy with it of course, if you're willing to share the info. The missus likes having a warm arse when out in any season !

zed4

Original Poster:

7,248 posts

252 months

Wednesday 15th January 2014
quotequote all
Richard 858 said:
zed4 said:
Interesting, thanks. I presume it’s one button for both seats then? My kit has 2 buttons, one for each seat.
I'd be interested in the details of your kit, once your happy with it of course, if you're willing to share the info. The missus likes having a warm arse when out in any season !
Sure, I'll post up some photos when I install it. My only concern is mounting the little switches, as the centre console vinyl and foam backing is quite thick, so it might be tricky to get it mounted. It looks like the switch is designed to be mounted on plastic.

The kit is a Waeco retrofit heated seat kit, but I can't remember which one off the top of my head. I'll confirm tonight. Looks like a good kit though. I believe it's the same kit that was fitted in the Defender.

It was my Christmas present from my dad! smile

s p a c e m a n

12,103 posts

178 months

Wednesday 15th January 2014
quotequote all
Richard 858 said:
I've pretty sure I've read in a previous thread that the button is to the left underside of the steering column, sort of opposite side of the boot release button
nono

Thats the check all of the fuses, take off the top of the dash and post a help thread on pistonheads button

JonathanT

880 posts

314 months

Wednesday 15th January 2014
quotequote all
Frank Smith said:
I have got factory fitted heated seats on my 450 and the button switch is located on the right hand side of the steering column just below the immobiliser slot. Hope this helps.
likewise my factory fitted heated seats button is on the steering column on the right hand side. I too would be interested in the details of the kit, because my heating elements have burnt out... 8-[

Richard 858

1,882 posts

165 months

Wednesday 15th January 2014
quotequote all
s p a c e m a n said:
nono

Thats the check all of the fuses, take off the top of the dash and post a help thread on pistonheads button
Not on mine I don't think, now tried it and it turns the dash lights off !

JohnC35

74 posts

153 months

Wednesday 15th January 2014
quotequote all
Quite a few to choose from on ebay and amazon, carbon fibre ones look the best, good looking switches too.

zed4

Original Poster:

7,248 posts

252 months

Wednesday 15th January 2014
quotequote all
I think my kit is the Waeco Magic Comfort MSH60