High beam flashing on and off!
Discussion
Hi guys, I've got a dodgy connection on my high beam stalk. Every now and then my hi beam flashes on as I go over a bump and if I fiddle with the stalk it stops,
Has anyone had this problem and can it be a quick fix or am I likely to need new stalk etc.
I haven't attempted to get at it yet so any tips would be much appreciated.
Alun
Has anyone had this problem and can it be a quick fix or am I likely to need new stalk etc.
I haven't attempted to get at it yet so any tips would be much appreciated.
Alun
it's a simple fix.
I unscrewed the cowling (two screws underneath) and released the indicator stalk (there are two clips top and bottom). The electrical connections were on one or two connector blocks which made it even easier. When mine started randomly flashing on bumps and braking, I decided to replace both sides as a precaution.
I unscrewed the cowling (two screws underneath) and released the indicator stalk (there are two clips top and bottom). The electrical connections were on one or two connector blocks which made it even easier. When mine started randomly flashing on bumps and braking, I decided to replace both sides as a precaution.
I opted to go for GM original since they weren't hugely expensive. Here's what I paid 12 months ago via: http://www.genuinepartsearch.co.uk
including VAT & postage.... 90243394 £15.80 (wash/wipe) and 9181010 £ 36.62 (indicator). I think pattern parts were about a tenner.
and I found this page useful too: http://wiki.seloc.org/a/Indicator_stalk
including VAT & postage.... 90243394 £15.80 (wash/wipe) and 9181010 £ 36.62 (indicator). I think pattern parts were about a tenner.
and I found this page useful too: http://wiki.seloc.org/a/Indicator_stalk
Gassing Station | Chimaera | Top of Page | What's New | My Stuff





