Propshaft UJ's

[Chuffmeister]

I recall getting some vibration at very high speed, so was thinking about replacing the UJ's whilst the exhaust is off and being repaired.

Will these do the job? I take it I'll need two; one for each end?

http://www.lrdirect.com/RTC3346-supplied-by-bearma...

[phazed]

I doubt it, I think that they are a TVR specific.

Of course if you know the code number for them then they can be sourced at a specialist.

[phazed]

Brainstorm!

I have 2 on the shelf!

GKN 18196

7.900.27.06.13.001.

ZKG

[Chuffmeister]

phazed said:

Brainstorm!

I have 2 on the shelf!

GKN 18196

7.900.27.06.13.001.

ZKG

Selling them Peter?

[Chuffmeister]

They may be the same. Copied from EBay:

Type:
Transmission & Drivetrain
Manufacturer Part Number:
RTC3346
Subtype:
Universal Joint
Interchange Part Number:
18196 U100
Vehicle Type:
Land Rover
Other Part Number:
RTC3346G
Part Manufacturer Number:
RTC3346
Model:
Series and Defender See Listing Details
Reference OE/OEM Number:
RTC3346
Intended Use:
Replacement Part

[phazed]

Chuffmeister said:

Selling them Peter?

If you're desperate otherwise I'll keep them in stock till the inevitable

[Chuffmeister]

phazed said:

If you're desperate otherwise I'll keep them in stock till the inevitable

No worries... I'm desperate for timber cladding at the moment for my shed build if you have any of that on the shelf??? Can't seem to find anybody that wants business South of Watford...

[phazed]

Chuffmeister said:

No worries... I'm desperate for timber cladding at the moment for my shed build if you have any of that on the shelf??? Can't seem to find anybody that wants business South of Watford...

What sort of cladding?

[Chuffmeister]

I need to cover 52sqm. My shed is 3x4m. Standard shiplap for the walls and perhaps something thicker for the roof and floor. I had somebody who was going to do the lot for £500 delivered this week, but it failed to materialise twice. The only places doing a similar price are in the NE and can't deliver till the end of May.

It's really holding my plans up...

[spend]

Ours are the same as LR... but beware cheap pattern parts... I'd only bother with GKN/HardySpicer UJ's

I have kept this information for several years which may help:

GKN said:

GKN (Hardy Spicer)] Cross References:

Description: UJ 1310 Series + lube 27x81.8 Standard (RTC3346) = HS166 (boxed) or U166 (unboxed) New GKN Part No: 18196
Description: UJ 1310 Series + side lube 27x81.8 Heavy Duty = HS163 (boxed) or U163 (unboxed)

Description: UJ 1300 Series none-lube 27x74.6 (sealed for life) Standard (RTC3458) = HS161 (boxed) or U161 (unboxed) New GKN Part No. 13872
Description: UJ 1300 Series + lube 27x74.6 Heavy Duty = HS160 (boxed) or U160 (unboxed) New GKN Part No. 18179

Description: UJ 1330 Series + side lube 27x92 HD (external circlip) = HS173 (boxed) or U173 (unboxed) New GKN Part No. 11772

[phazed]

Use a treated ship lap for the walls and a cheap ply for roof and floor.

Use a decent elastomeric felt on the roof.

[Chuffmeister]

phazed said:

Use a treated ship lap for the walls and a cheap ply for roof and floor.

Use a decent elastomeric felt on the roof.

Know anywhere?

[Chuffmeister]

spend said:

Ours are the same as LR... but beware cheap pattern parts... I'd only bother with GKN/HardySpicer UJ's

I have kept this information for several years which may help:

GKN said:

GKN (Hardy Spicer)] Cross References:

Description: UJ 1310 Series + lube 27x81.8 Standard (RTC3346) = HS166 (boxed) or U166 (unboxed) New GKN Part No: 18196
Description: UJ 1310 Series + side lube 27x81.8 Heavy Duty = HS163 (boxed) or U163 (unboxed)

Description: UJ 1300 Series none-lube 27x74.6 (sealed for life) Standard (RTC3458) = HS161 (boxed) or U161 (unboxed) New GKN Part No. 13872
Description: UJ 1300 Series + lube 27x74.6 Heavy Duty = HS160 (boxed) or U160 (unboxed) New GKN Part No. 18179

Description: UJ 1330 Series + side lube 27x92 HD (external circlip) = HS173 (boxed) or U173 (unboxed) New GKN Part No. 11772

Thanks Spend, they have them at the same place for £2.00 cheaper.

[Andy_mr2sc]

Chris have you tried Wingham Timber?
They've given me good prices before and are often up for a deal.

Andy

[Chuffmeister]

Andy_mr2sc said:

Chris have you tried Wingham Timber?
They've given me good prices before and are often up for a deal.

Andy

Cheers Andy, emailed them Friday and will follow up Monday!

[jojackson4]

It's all going abit

[phazed]

Christian, YHM.

[jojackson4]

Gents
Don't you need to have the prop balanced if you have been messing with it?

[Chuffmeister]

jojackson4 said:

It's all going abit

[Chuffmeister]

jojackson4 said:

Gents
Don't you need to have the prop balanced if you have been messing with it?

I'm going to mark it and put it back the same.