Mushrom vent removal

[SILICONEKID346HP]

How do i remove it ? seems solid !

[Chuffmeister]

Take off the plastic and sponge and then move from side to side. You could use a pair of pliers on the flat section for leverage. I thought you drilled yours?

[SILICONEKID346HP]

Thanks It`s now fitted ,the idle feels better .

[K4TRV]

SILICONEKID346HP said:

Thanks It`s now fitted ,the idle feels better .

I removed mine in 2010 and replaced with a "bung" - never ever noticed any difference over 3-years, no oil leks and no "hassle" from MSA Scrutineers.

Some said "Scrutineers" from the Cheltenham area sought to get all V8-owners (TVRs/Morgan etc) to have a pipe from the Rocker Breather to a catch-tank incase the 1 Thou of an inch breather hole "leaked" oil all over the track and IAC with Blue Book and non-sealed breathing?

Do what you "think" works for you, IMVHO 8-))

[Chuffmeister]

Strange, it didn't fit mine!

[SILICONEKID346HP]

Chuffmeister said:

Strange, it didn't fit mine!

A slight tap with a block of wood sorted it ! stuck it in the freezer for an hour ,may or may not of made a difference .

I marked it with some masking tape ,did not want it to go in to far ..Thanks for that .

[Chuffmeister]

SILICONEKID346HP said:

A slight tap with a block of wood sorted it ! stuck it in the freezer for an hour ,may or may not of made a difference .

I marked it with some masking tape ,did not want it to go in to far ..Thanks for that .

No probs. Did you drill your old one in situ?

[SILICONEKID346HP]

Chuffmeister said:

No probs. Did you drill your old one in situ?

Yes with a small hoover pipe i use for servicing boilers .. Why could you not get it in the hole ? It wiggled out then wiggled in !