Swirl pot centre jubilee clip

[dwhitaker]

Does anyone know where to get one?

Thanks

[phazed]

Slightly confused?

Do you mean the centre filler screw?

[dwhitaker]

No the jubilee clip that goes round the middle. With the kink in it.

[phazed]

Is that a precat?

[Chuffmeister]

Its a large jubilee clip that tightens around the circumference of the swirlpot. The clip has a raised 'blip' (sorry, can't think of the noun, too tired!) to secure the wiring from the otter switch to the side of the swirlpot.

[Ozstyle]

Hi,
It's just a standard worm drive clip, 100-120 mm diameter I think,

I got a stainless one from an auto factors, then just formed the bump in the clip with a pair of pliers and a piece of pipe of similar diameter to the water hose that it holds to the swirl pot.

Ozstyle

[phazed]

Now I get it.

Mine had a cable tie!

[Sardonicus]

Ozstyle said:

Hi,
It's just a standard worm drive clip, 100-120 mm diameter I think,

I got a stainless one from an auto factors, then just formed the bump in the clip with a pair of pliers and a piece of pipe of similar diameter to the water hose that it holds to the swirl pot.

Ozstyle

This

[jojackson4]

phazed said:

Now I get it.

Mine had a cable tie!

+1

[Goaty Bill 2]

phazed said:

Now I get it.

Mine had a cable tie!

Damned modifiers

[phazed]

Goaty Bill 2 said:

phazed said:

Now I get it.

Mine had a cable tie!

Damned modifiers

Damned "stuck in their old way'ers"

[dwhitaker]

Thanks all, appreciate it.