pas rack schematic?

[OleVix]

I have mine apart now for a refurb and im not sure about the correct way to put it all together again

Does anyone have aschematic or exploded view of how its put together? Ive gotr most of it covered but there are two nylon rings im not quite sure which way they go...

[phazed]

Never seen one.

Hope someone can help you.

[Hedgehopper]

Do mean these?............http://www.powersperformance.co.uk/store/slug/steering-rack-stop-spacer/

If so ,they are lockstops and slip onto each end of the rack before you screw the inner ball-joints on. They limit the lock to prevent the tyres hitting the wishbones.

Sorry no pics. or diagrams.

[OleVix]

Thanks Hedge!

I can see now why these are a B*** to refurb. It needs a lot of heat to come apart, and its alloy on alloy threads with loctite so the threads (which are 45mm x1,5mm) gets chewed when dissassebling. Luckily I now bought a 45mm tap to clean it up before rebuild, it was only 200 pounds

Then theres the fact that there is no space or groove to get a hold on the seal which is in the middle of the rack, I did it though with some help! I would not send this rack to anyone else but someone who was and expert on TVR racks!