Chimaera Heater
Chimaera Heater
Author
Discussion

F1stato

Original Poster:

36 posts

138 months

Friday 6th March 2015
quotequote all
Hello,

I cannot get the heater dial on my chimaera 450 to turn all the way to cold. The best I cam get is three quarters of the way so it always pushes out a Bit of heat, any ideas?

ianwayne

8,524 posts

297 months

Friday 6th March 2015
quotequote all
You need to check if the water valve is stuck or can actually be closed all the way. It's up in the passenger footwell and is operated by only a thin wire from the heater control. You can un-hook the wire and operate the valve with your thumb for closing / opening.

It may be that the valve is OK and you need to adjust the range of movement of the control on the dash, but that will mean the dash top coming off.

Dungman

316 posts

200 months

Friday 6th March 2015
quotequote all
Sounds like the cables that connect to the dials have came loose or got chewed. Dash top off to access and all should become clear.

F1stato

Original Poster:

36 posts

138 months

Saturday 7th March 2015
quotequote all
Thanks for your replies,

Any chance you can add a bit more detail regarding accessing the valve, what panels carpet to remove? And the same with how to lift the top dash?

Thanks

trev4

747 posts

191 months

Saturday 7th March 2015
quotequote all
I would check the valve first just look up on the inner wing from the passenger foot well follow the heater pipes and you will find it, might be worth changing I have had two fail, all the information for part numbers and dash removal is on the chimaera pages good luck its a bit of a fidly job