new discs and pads
new discs and pads
Author
Discussion

blujay10

Original Poster:

583 posts

259 months

Thursday 9th April 2015
quotequote all
Having new dimpled/grooved discs and Mintex 1144 pads fitted next week.
Simple question, how long will these take to bed in? (Please no discussion about make etc etc etc, my mind is made up!)
I have a track day at Goodwood a week later so im hoping thats enough time! Its about a 2 1/2 hour drive to the circuit.
Cheers
James

Sardonicus

19,442 posts

250 months

Thursday 9th April 2015
quotequote all
About 50-100 mile braking progressively harder should do it, I always found because the discs are grooved break-in happens more rapidly anyways wink

QBee

22,469 posts

173 months

Thursday 9th April 2015
quotequote all
+1
Mine bedded in similarly quickly and gave so much more bite on braking than plain disks.

PJ57

245 posts

160 months

Thursday 9th April 2015
quotequote all
How are these on the road? I've used grooved discs before on a bm, and they were pretty noisy in use.
Will need to replace mine sometime soon, and looking for best street use discs and padssmile

QBee

22,469 posts

173 months

Thursday 9th April 2015
quotequote all
Mine are Black Diamond 324mm (Focus RS) 12 groove disks, with Hawk racing pads, just to be clear. No noise whatsoever on the road .

On track no noise either, you just feel the bite of the grooves when you brake hard.

My TVR guy was surprised how much I had worn the disks in 8 months, but I have turned into someone who brakes really late and really hard on track, as I find it sets the car up better for the corner.

blujay10

Original Poster:

583 posts

259 months

Friday 10th April 2015
quotequote all
Ok great, should have time to bed them in. Will give progress report after the track day.
Thanks for the replies, most helpful as ever

domV8

1,408 posts

210 months

Friday 10th April 2015
quotequote all
PJ57 said:
How are these on the road? I've used grooved discs before on a bm, and they were pretty noisy in use.
Mine tick away just like spokey-dokeys wink

Sounds like I'm 8 again (but with a tailgunner out the back)laugh

ptholt

223 posts

307 months

Sunday 12th April 2015
quotequote all
I've had my hi-spec four pot kit on for two weeks and just about to purchase ferodo pads as the squeal from mid-light use on the mintex is horrific, nothing seems to stop it short of stamping on the pedal.

Bizarrely the garage fitting it went <sharp intake of breath> ooooo mintex, we stopped using these in the late naughties when they squealed like mad on scoobs and eve's, sadly it appears there right. Coming off next week.