Nylon thrust washers

[Chimp871]

Just thought I'd share this as I wasn't prepared pay £1 per piece from parts places when you can buy 100 for under a tenner.

http://www.nylonalloys.co.uk/cgi-bin/shop/nylon-al...

My bushes came with thrust washers 31mm OD, 16mm ID, 2.5mm thickness

[Chuffmeister]

Are they the same material?

[caduceus]

Superb find

But you can't make an order of less than £10

[Chimp871]

Will see, they're nylon and I don't see anything special about the ones that came with my bushes.

[Chuffmeister]

I'll take 100 for that price. Can do a group buy. Whose interested?

[caduceus]

Chuffmeister said:

I'll take 100 for that price. Can do a group buy. Whose interested?

Me!

[Chuffmeister]

Cool, we'll get a few interested parties and then place an order! First ten to commit!

1. Chuffy
2. Cad

[Chimp871]

I'll order 300, which takes it past minimum tenner spend as I need to get cracking on with rebuild, only missing pieces right now.

If they're decent I'll let you know and send them to yourselves

Ps - I dremmeled the current ones to make a little bigger for the shock absorbers.

[Chimp871]

300 cost all in £20.47

[Chuffmeister]

Will pm you!

[caduceus]

Chimp871 said:

Ps - I dremmeled the current ones to make a little bigger for the shock absorbers.

I too had to do this when doing the Cerb resto.

[S6 Devil]

YHM

[S6 Devil]

Chimp871 said:

Just thought I'd share this as I wasn't prepared pay £1 per piece from parts places when you can buy 100 for under a tenner.

http://www.nylonalloys.co.uk/cgi-bin/shop/nylon-al...

My bushes came with thrust washers 31mm OD, 16mm ID, 2.5mm thickness

Are you fitting standard bushes or polybush? I'm about to do this but am getting conflicting opinions.

[Chimp871]

Regular bushes.

[jojackson4]

Yep I will have a go with that there not going to go off

[Alexdaredevils]

S6 Devil said:

Are you fitting standard bushes or polybush? I'm about to do this but am getting conflicting opinions.

I'm just about to fit standard bushes and my car will be pushed very hard

[J400GED]

S6 Devil said:

Are you fitting standard bushes or polybush? I'm about to do this but am getting conflicting opinions.

Standard metalastic bushes.

[caduceus]

It's a real shame someone can't find where the standard bushes originate from.

[phillpot]

caduceus said:

It's a real shame someone can't find where the standard bushes originate from.

If you have some dimensions you could try these guys ?

[Chuffmeister]

phillpot said:

caduceus said:

It's a real shame someone can't find where the standard bushes originate from.

If you have some dimensions you could try these guys ?

Send them the bushes that you remove and see if they can match them to ones they sell?