Replacement rear badge
Discussion
I've put this before but it's worth doing yourself for pence. The badge is already electroplated brass, so rub it all off first (from the bit you can see anyway)
Then you can spray it black. let it dry, and then rub off the paint to reveal the brass underneath. Then a few coats of varnish. I got the tip from off here.

By the way, it's not easy to get off. you have to pull back a large area of carpet and the retaining nuts are tricky to get to.
Then you can spray it black. let it dry, and then rub off the paint to reveal the brass underneath. Then a few coats of varnish. I got the tip from off here.
By the way, it's not easy to get off. you have to pull back a large area of carpet and the retaining nuts are tricky to get to.
Cheapest solution is from ebay. I got one of these intending to refurb the original badge, but have not got round to it yet.
http://www.ebay.co.uk/sch/m.html?_odkw=&rmvSB=...
http://www.ebay.co.uk/sch/m.html?_odkw=&rmvSB=...
Edited by IainG on Monday 11th May 16:07
Gassing Station | Chimaera | Top of Page | What's New | My Stuff



