Discussion
If I lean back hard on the drivers seat I can feel a solid bar running vertically up the seat back, this set me wondering what effect this would have on my bod in the event of a rear end shunt...
So then I looked at an alternative seat. Clive's Zertec seats look cool but at best part of a grand that's an aweful lot of
Anyone fitted any other aftermarket seats?
Simon

So then I looked at an alternative seat. Clive's Zertec seats look cool but at best part of a grand that's an aweful lot of


Anyone fitted any other aftermarket seats?
Simon
quote:
I have Cerbera seats in my Griff.
Is there much of a difference between these and the standard Griff seats, width-wise? I only ask because new seats are on my extensive (!) to-do list, and a couple of people with - ah - more ample backsides than mine have found the Griff seats a bit narrow.
OK, I'll try to take some pics.I have a friend who has a digital camera, although I'm not to sure how to put them on the posting.BTW all the interior has been trimmed in soft grey conolly autocalf (only the best ofcourse!!) including the roof. I really dont like the carbon roof look, a bit ticky if you ask me. Once covered in hide the inside looks finished and much more classy.The roof is also new, covered in German Mohair(don't mention that to P.W.!!)The whole job looks spot on.
Mike.
Mike.
quote:
I have taken lots of pics and will post them shortly when I have worked out how the hell you do it!!!!
1. Upload the pix to www.webshots.com (you'll have to set up an account if you don't have one already).
2. In your message here, type [pic] before the link to your photo.
3. then end with [pic] again, but put a "/" in between the "[" and the "p"!! (Can't get the display to do this correctly if I type the box properly!)
Oh, nearly forgot. Make sure there are no spaces or full stops or anything either side of the link.
Hope this helps.
>> Edited by SGirl on Thursday 15th August 19:56
Gassing Station | Chimaera | Top of Page | What's New | My Stuff