Radiator issue
Discussion
So, the Chim has just passed the MOT (woot!) but the top of the radiator has a leak - 'pppfffffffff!!ing' coming from the top right hand corner - also definitive tell tale signs of leakeage, and very high temps - damn it!
I would rather recore it and save a bit of dosh - any suggestions for companies able to do it?
I like in Milton Keynes, but I suppose it can be sent off if need be.
Thanks in advance
Nosh
I would rather recore it and save a bit of dosh - any suggestions for companies able to do it?
I like in Milton Keynes, but I suppose it can be sent off if need be.
Thanks in advance
Nosh
You could try Andrew at Woburn 4x4 very nice chap and very very helpful. Dont have the number to hand currently but a quick search in tinterweb should find it.
He just fitted new coilovers and re-bushed my Chim and did an outstanding job, even fabricated and fitted heat shields to the upper wishbones as he was concerned about how close to the manifolds they were.
Real attention to detail.
He just fitted new coilovers and re-bushed my Chim and did an outstanding job, even fabricated and fitted heat shields to the upper wishbones as he was concerned about how close to the manifolds they were.
Real attention to detail.
Thanks for the responses guys.
It is going over to Kempston Rads tomorrow.
If they cannot fix it, then I will just get a new one from TVR Parts.
And another gremlin manifested itself before I took the rad out - fuel pump wouldn't prime and although the engine turned over, it would not start!
Oh well!!
Cheers
Nosh.
It is going over to Kempston Rads tomorrow.
If they cannot fix it, then I will just get a new one from TVR Parts.
And another gremlin manifested itself before I took the rad out - fuel pump wouldn't prime and although the engine turned over, it would not start!
Oh well!!
Cheers
Nosh.
Hi Nosh
Did consider a new one myself, as only about £60.00 in it but considered
My car is 94 so sensor in swirl pot not in the rad
The bottom hose connection is turned up, not straight out or to the side
My fans have been modified to twins, and as such the top and bottom rails are tapped to take the fixings.
Knowing the way TVR are, by having a recore I knew it would fit as the side tanks / rails would be unchanged.
It would be very hard to tell the difference between a recored and a new one, it was that good a job
Just for you consideration
Did consider a new one myself, as only about £60.00 in it but considered
My car is 94 so sensor in swirl pot not in the rad
The bottom hose connection is turned up, not straight out or to the side
My fans have been modified to twins, and as such the top and bottom rails are tapped to take the fixings.
Knowing the way TVR are, by having a recore I knew it would fit as the side tanks / rails would be unchanged.
It would be very hard to tell the difference between a recored and a new one, it was that good a job
Just for you consideration
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


