Early Black Bezel Speedo Wiring
Discussion
Hi All,
I have a early black bezel speedo that is not working. I've changed over the speed sensor on the gearbox for a new one so that is all fine and made sure the connector in the transmission tunnel is tight. I've also checked all fuses only one that is blown is the clock and dial lights one which was down to me wiring up the clock the wrong way round !
Does anybody have a record or is able to check due to the dash cover being off the wiring for the back of the speedo ?
At present, I have (if looking at the back of the speedo ) on the back three pin block
Bottom left Green / Yellow
Top Left Green
Bottom Right is Black
Any confirmation that this is correct would be much appreciated as I'd hate all my investigations to be in vain due to previous wrong wiring !
Cheers
I have a early black bezel speedo that is not working. I've changed over the speed sensor on the gearbox for a new one so that is all fine and made sure the connector in the transmission tunnel is tight. I've also checked all fuses only one that is blown is the clock and dial lights one which was down to me wiring up the clock the wrong way round !
Does anybody have a record or is able to check due to the dash cover being off the wiring for the back of the speedo ?
At present, I have (if looking at the back of the speedo ) on the back three pin block
Bottom left Green / Yellow
Top Left Green
Bottom Right is Black
Any confirmation that this is correct would be much appreciated as I'd hate all my investigations to be in vain due to previous wrong wiring !
Cheers
Gassing Station | Chimaera | Top of Page | What's New | My Stuff