A question of size...
A question of size...
Author
Discussion

dunk911

Original Poster:

8 posts

127 months

Friday 8th April 2016
quotequote all
Hi guys

I bought my first TVR this February an I have to say I'm never going back! It is a fantastic drive. My parents however are not so impressed because I still live at home!

Part of the deal was that if I bought it then I would buy a house and clear off. So I'm looking for garages possible with without a house attached. I jest.

Anyway, how big does a garage need to be to allow me to do some work on my chimaera? How large are your garages?

Also any other garage advice would be super :-)

Cheers, Dunc

ClassiChimi

12,424 posts

178 months

Friday 8th April 2016
quotequote all
Dunk, that's a great question sir, like it thumbup
Oh and welcome to the fold.
I've got a massive garage,, it's called the driveway. hehe
Today we were discussing garages and it's true to say the cars quite wide, small car but wide.
Anything with a roofs good,
Even a car port would allow you to keep the elements directly off it.
But if your talking garages,, just wait awhile, hehe
You might just see a few on here that might take your fancy,,,
Being practical about it, even a single garage you can work in, car half in/half out sort of thing, I've known blokes build serious cars in single lockups with no lights!! Just takes being organised.

The single biggest advantage having a proper sized garage would then be a two post lift,, that allows you to do any job with ease of access.
Today I helped another piston header re fit the bottom bolts on the O/Side manifold, that on the ground on axle stands is a challenge,, with a two post lift and distorting my hand into something that might look like it's been crushed in a vice,, I was able to do the bolts up very easily and with the starter motor in place,,, that's impossible unless you can face in the opposite direction doing an impression of Stretch Armstrong and it wouldn't be possible on stands without starter removed.

I'd say any garage is better than no garage so go from there,, width is the thing I'd be thinking about.
Can't wait to see some of the boys men sheds on here,,,, thumbup

ClassiChimi

12,424 posts

178 months

Friday 8th April 2016
quotequote all
Dunk 911 ,, I'd change that sharpish if you want help. hehe joking we love Porsches as long as there behind us,,, biglaugh

dunk911

Original Poster:

8 posts

127 months

Friday 8th April 2016
quotequote all
I should really be dunk430 but I'm not. The first classic car I worked on after school when I had a job in a classic car garage was a 911. Best to learn on something that doesn't matter eh? That's where I fell in love with TVRs. If you remember the octane magazine from a few years ago with the two Griffith's on the cover, the old 1960s off white Griffith belonged to the garage owner.

Anyway that's good advice, cheers.

I had already sort of identified that width is important because cars like these are wide. I had similar issues with my MX5. Just not really sure what the ideal width is.

A ramp would be great but I think for starters I'll just make something like this: http://corvettec3.ca/ramps.htm

I can't wait to get my own place and paint the garage floor and get to it.

ClassiChimi

12,424 posts

178 months

Friday 8th April 2016
quotequote all
Hey that's a good idea re the ramps,, need good height then so that's a consideration too.

Cracking story about your automotive induction, I'm sure you wear your name with pride. thumbup


Steve_D

13,802 posts

287 months

Friday 8th April 2016
quotequote all
ClassiChimi said:
......Can't wait to see some of the boys men sheds on here,,,, thumbup
Went to a property auction but the bidding went way beyond my means.
A largish flat and the 11 garages it was on top of.
That would have been heaven.

Steve

Brerabit

74 posts

136 months

Saturday 9th April 2016
quotequote all
If we’re talking minimum width, I’d work on being able to open the doors fully - even if at that, they’re just touching the walls, though a patch of old carpet on the walls will save the paintwork. It’s surprising the number of jobs that require working in the footwells, battery, throttle cable, under dash electrics etc. and if you can’t at least get the doors fully open - which on a Chimaera is still not as much as would be helpful - you’ll be really struggling.

sheel

696 posts

252 months

Saturday 9th April 2016
quotequote all
Stuff the house,have a good garage you can't keep he car in a house!
Rich

QBee

22,464 posts

173 months

Sunday 10th April 2016
quotequote all
The simple answer is buy a house, however small, with a double garage, ideally with a full width door arrangement and a high roof. Then you can park in the middle of it, and have all your stuff, work benches etc around the sides, not the back wall, and not compromise the ability to work on the front of the car.

In time you might install a professional two post lift if the roof is a little higher than standard - they are not as expensive as you might think.

jesfirth

1,743 posts

271 months

Sunday 10th April 2016
quotequote all
This is what you need.


Bassfiend229hp

5,530 posts

279 months

Sunday 10th April 2016
quotequote all
jesfirth said:
This is what you need.

Just needs a microwave and a kettle and you'd never leave... smile

jesfirth

1,743 posts

271 months

Sunday 10th April 2016
quotequote all
Bassfiend229hp said:
jesfirth said:
This is what you need.

Just needs a microwave and a kettle and you'd never leave... smile
funny you should say that it now has a kettle, a fridge and a 52 inch TV with Sky. When my wife saw it she did ask if I was moving out of the house.