Engine breather to plenum
Discussion
Why is it when i block the air supply to the plenum and hold and block the breather pipe the engine runs much more smooth and far more quiet .
The catch tank had three inch of water and oil in the bottom .
Would it work better if I just left the catch tank in and ran a pipe under the engine with a small filter .
The catch tank had three inch of water and oil in the bottom .
Would it work better if I just left the catch tank in and ran a pipe under the engine with a small filter .
Edited by SILICONEKID345HP on Friday 2nd September 17:42
Edited by SILICONEKID345HP on Friday 2nd September 17:45
SILICONEKID345HP said:
The breather pipe splits on a tee piece.
If I disconnect the very small hose and seal the plenum by putting my finger on it then it idles much smoother .Why does it split both sides .
I wish someone would tell me what function that pipe performs, it has never made any sense to me. The rocker cover breather to the throttle body is obvious but why does it need two routes into combustion air chamberIf I disconnect the very small hose and seal the plenum by putting my finger on it then it idles much smoother .Why does it split both sides .
Gassing Station | Chimaera | Top of Page | What's New | My Stuff



)
