MS2 megalog viewer
MS2 megalog viewer
Author
Discussion

DangerousDerek

Original Poster:

8,675 posts

244 months

Tuesday 6th September 2016
quotequote all
so I finally tried logging results while drag racing.
Any tips on what to view, look out for etc appreciated.


TV8

3,441 posts

199 months

Tuesday 6th September 2016
quotequote all
Hi Derek, it doesn't mean anything to me but I am going to look for my etch-a-sketch now...

DangerousDerek

Original Poster:

8,675 posts

244 months

Wednesday 7th September 2016
quotequote all
I see the AFR drops into the 11's between 4800 and 5300 and the revs don't climb as steep. So I guess take a little fuel out at full throttle here might pick up a little time. Hmmmm?

Gear changes can also be improved. It looks like the actual change takes 0.3 but then the clutch etc takes 0.25 to settle. So in effect I am off the power for over half a second each change!
Anyone tried flatshifting?

BoostedChim

542 posts

249 months

Thursday 8th September 2016
quotequote all
AFR's look ok to me, like you said the clutch looks like it slips momentarily. As a comparion here mine at the Pod 12.3 @ 116. You can see how much less of 4th gear yours uses with the 3.08.


DangerousDerek

Original Poster:

8,675 posts

244 months

Thursday 8th September 2016
quotequote all
BoostedChim said:
AFR's look ok to me, like you said the clutch looks like it slips momentarily. As a comparion here mine at the Pod 12.3 @ 116. You can see how much less of 4th gear yours uses with the 3.08.

I am back on the standard 3.45:1 diff now but the tyres make up a little being 26" dia.
I did hold onto 3rd for a bit longer than you also by the looks of it.

I think this run of mine was a fairly easy run. Looking forward to getting more runs logged on nitrous on 18th and seeing the differences.