Fan belt part no. anyone?

[matt 74]

Has anyone got the part no. handy for a Chimaera 4.0l 2000 serp engine with PAS?

Answers on a postcard please!

[GreenV8S]

What's that funny writing on the back of the fan belt?

[Big Al.]

Just checked mine.

Got a couple on the same belt

Land Rover ERR.5267

DAYCO? 7PK 1850

Hope this helps.

[seasider]

Big Al. said:

Just checked mine. Got a couple on the same belt Land Rover ERR.5267 DAYCO? 7PK 1850 Hope this helps.

Land Rover ERR.5267.... part number
7PK 1850.... Number of ridges & length of belt
AFAIK

[matt 74]

thanks all!!

[harrow_chim]

I agree with the part numbers - I ought to buy one as well - where you going to buy it from? I heard it was only available from TVR dealers and not available from Landrover.
Do tell.
Nick

[shpub]

Yes and it is cheaper. However I have seen some cars that have different belts so worth chceking that what you get is what you want rather than wait until you are stranded out on the moors and then find out that the belt is the wrong size.

[THORNOGSON]

I have just fitted a Quinton Hazell part No 7PK1850.
G.

[Big Al.]

THORNOGSON said:

I have just fitted a Quinton Hazell part No 7PK1850. G.

What a coincidence!

[matt 74]

I ahve tried the ERR part no at a landrover dealer and they dont recognise it, also the same for the QH no at a motorfactors - any further numbers appreciated!

[mongoose]

matt 74 said:

I ahve tried the ERR part no at a landrover dealer and they dont recognise it, also the same for the QH no at a motorfactors - any further numbers appreciated!

dont use the err part no. just ask local motorfactors for a 7pk1850 and you should have no problems,this just describes the belt as 7 grooves and 1850mm long,if they cant get that right/dont understand it then they dont deserve your custom!!.im sure ive read on here that the ERR numbers on some or all the belts on serp engines were tvr specific?if that were the case,then no landrover dealer would recognise them.

>> Edited by mongoose on Friday 25th March 09:31

[Big Al.]

matt 74 said:

I ahve tried the ERR part no at a landrover dealer and they dont recognise it, also the same for the QH no at a motorfactors - any further numbers appreciated!

Well the belt I'm sitting hear holding, has definitely got both part numbers on it!

Even has Range Rover printed in a little oval!

[dlewis]

From a '98 450 serp OEM with AC

part number ERR 5017, badged Land Rover & Dayco.

Dave



>> Edited by dlewis on Friday 25th March 12:53