Handbrake warning switch part number
Discussion
Cleaned up the plate under the brake reservoir cap so the low brake fluid warning is now working but discovered (after a lot of centre trim removal!) that the handbrake warning switch has been snapped off. Glad it wasn't the lamp because I haven't seen how you get them off the pre-facelift panel,
I see TVR parts and Racetech both sell them for £5 to £6 but want £7 + for P+P!

The nut is 3/4 and just about reachable from above with a spanner. Held the connectors with pliers and managed to pull it all into the car. Would have been very awkward to fish back up afterwards without a ramp.
Is there an alternative or other model part? Wallways parts were tipped in another thread but seem to have gone under.
I suppose I could buy other parts I may 'need' to justify postage.
I see TVR parts and Racetech both sell them for £5 to £6 but want £7 + for P+P!
The nut is 3/4 and just about reachable from above with a spanner. Held the connectors with pliers and managed to pull it all into the car. Would have been very awkward to fish back up afterwards without a ramp.
Is there an alternative or other model part? Wallways parts were tipped in another thread but seem to have gone under.
I suppose I could buy other parts I may 'need' to justify postage.

Edited by ianwayne on Friday 11th August 18:57
Nice one! I should have thought to search for a brake light switch because they work in a similar way; press to break a cct.
The plunger looks like it may be slightly shorter than the one from Racetech:
http://www.racetechdirect.co.uk/car-parts/electric...
But it doesn't matter I suppose as long as the plunger is pressed enough to break the circuit.
The plunger looks like it may be slightly shorter than the one from Racetech:
http://www.racetechdirect.co.uk/car-parts/electric...
But it doesn't matter I suppose as long as the plunger is pressed enough to break the circuit.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff



