Gas Gold set up

[CHIMV8 500]

Chaps
Should know after 12yrs ownership but

What are the settings for 15. Front and 16 rear

Threads upto underside of the nut that presses up to the Spring

Damper clicks front and rear

I know it's approx but gives me an idea to adjust from

[Belle427]

This may help, i think i have mine set at about 15 clicks from soft all round.
I find it difficult to measure from chassis to floor to set the ride height especially when its not totally flat.

https://www.pistonheads.com/gassing/topic.asp?t=96...

If someone has standard bilsteins it would be nice to get a measurement from floor to wheel arches just as a guide.

[CHIMV8 500]

Excellent link cheers

Knew Mr Byron would come in handy as usua in the thread

[QBee]

He is a fount of useful knowledge, and very detailed.
I see it only took you 14 hours and 55 minutes to finish reading it.....

[jojackson4]

QBee said:

He is a fount of useful knowledge, and very detailed.
I see it only took you 14 hours and 55 minutes to finish reading it.....

[ChimpOnGas]

There is a simpler way



Just bolt them on and dive

[QBee]

With or without SCUBA equipment?

[sapper]

Just bolt them on and dive
[/quote]
Which ones are they, I'm still on my original billies and they are almost 20 years old now. All I've done is replace the bushes.

[Belle427]

They are the latest Mk4 design, available below. May change mine next year.
http://www.ebay.co.uk/itm/TVR-Griffith-Chimaera-Bi...