Heater Wiring Chimaera / Griff

[netdream]

Eveving.
I am in the process of rewiring my early Griff (1991) after a fuebox meltdown and could do with some of your invaluable help with the wiring around elements of the heating control.

At this moment I have no heater control at all - No control of the water valve or heater fan - I have the red and black feed from the water valve connected to nothing and I expect the same to be true of the heater fan.

Hanging near my fusebox are two wires - Blue/ Orange stripe and Blue / Red stripe. Each wire connects to a diode but then goes nowehere.

Could anyone shed some light on what I should be connecting to the Blue / Orange and Blue / Red and the same goes for the water valve.

Thanks for any pointers.

[Penelope Stoppedit]

Courtesy of Bertram Hill Website

http://www.bertram-hill.com/heater-problems.html

The owner of the website posts here and is of much knowledge, the website contains really good information

Member Link if you wish to contact https://www.pistonheads.com/gassing/profile.asp?h=...

Edited by Penelope Stoppedit on Tuesday 7th November 18:18