Ally dash older '93 Chim

[L200OOM]

Looking to change my cracked dash for alloy / stainless one. Tvr mads don't do supply for older models . Any supplier suggestions ? Thanks

[jazzdude]

When you say 'older dash' do you mean the one with the three buttons for the lights?

If so, they supplied one to me last year in stainless steel.

[N7GTX]

Maybe a call to Central TVR? They do lots of Mk2 dash options. Cant see Mk1 ally/stainless listed but you never know?

http://www.centraltvr.com/model/chimaera/category/...

[wuckfitracing]

Im sure you already know but in case you dont the early Chims had different sized dials to the later cars. Adrian at Central will confirm this as I took mine in for a dash refresh and found out the new dash I bought from elsewhere didnt fit. Ended up with it redone in carbonfibre effect.

[Tonymg]

Home Base under £10 sticky back plastic Remember Blue Peter...

Edited by Tonymg on Sunday 3rd December 01:03

[L200OOM]

I have black dial surrounds with black dial faces. The speedo has the digital odometer, also looking for a repair on this as no speed is being shown and digital read out is blank. I may have to go down the blue peter route, but I know my attention to detail lacks and it would look just as bad as the original cracked one. Any one had any success in having one made using the original as a pattern? Laser or water cut Cnc?

[L200OOM]

I have black dial surrounds with black dial faces. The speedo has the digital odometer, also looking for a repair on this as no speed is being shown and digital read out is blank. I may have to go down the blue peter route, but I know my attention to detail lacks and it would look just as bad as the original cracked one. Any one had any success in having one made using the original as a pattern? Laser or water cut Cnc?