Resto coming along nicely - but more bolt sizes.needed...

[Dave85chim]

Hi All

Would anyone know the bolt size for the Gearbox bell housing shield plate?

[Dave85chim]

This is where im at.....

[V8Mad]

Assuming it's the same as the LT77 bellhousing bolts, you'll need (x4) 1/4" UNF x 5/8" with spring washers, in plain zinc from factory. Don't forget the larger two 5/16 UNC x 1/2", again with spring washers...
HTH

[Dave85chim]

Thanks for that - bolts ordered so fingers crossed! :-)