Top tip when reassembling rear brake carrier!!
Discussion
I am just putting the rear brake calipers back on the hubs / brake carrier.
But I have forgotten that the top screw for the brake caliper will not fit through, if you have assembled both parts first
.
So please rember if you need to assemble these parts (e.g. after a rebuild) to first put the screw in and then assemble + screw / torque everything up.
I hope this can help some one else
P.S. I have a 430 from 1993 ( standard brakes)
The problem I had. (Sorry but I cannot get the photo right way around )
This is how it should have been
But I have forgotten that the top screw for the brake caliper will not fit through, if you have assembled both parts first
.So please rember if you need to assemble these parts (e.g. after a rebuild) to first put the screw in and then assemble + screw / torque everything up.
I hope this can help some one else
P.S. I have a 430 from 1993 ( standard brakes)
The problem I had. (Sorry but I cannot get the photo right way around
)This is how it should have been
Gassing Station | Chimaera | Top of Page | What's New | My Stuff