? is "RISTS" on Chim Wiring Schematic.

[Harry Harris]

Could anybody please advise what the sub assembly shown as "RISTS" on the Chim wiring schematic is.
Connections seem to go to various lights/Alarm/Options (Heated seats & Mirrors) etc.
I am currently trying to improve my fuel gauge accuracy and this also has a connection to it.
I can only assume by process of elimination that it might refer to the small relay board under n/s dashboard?
But would like some further details/info if possible.
Many Thanks Harry

[jr6yam]

'RISTS' As in Lucas rists the wiring and cable company?

[Steve_D]

Almost all of the connectors used are Lucas Rists connectors so all that diagram is saying is you have arrived at a connector. Helpful.

PM me and I will send you my wiring diagram.
If you have Microsoft Visio all the better but if not I can save it as a pdf.

Steve

[srdtvr]

Steve D
bit cheeky jumping in on this post but is there any chance you could send me the circuit in pdf format please, it would be helpful to sort my hazard light issue !
Thanks
Steve

[Steve_D]

srdtvr said:

Steve D
bit cheeky jumping in on this post but is there any chance you could send me the circuit in pdf format please, it would be helpful to sort my hazard light issue !
Thanks
Steve

More than happy to but you will need to PM me so I can attach it to the reply.

But...what type of hazard switch does your car have. My circuit assumes the round ali switch connected to the lights module with a ribbon cable. I half suspect yours is earlier.
If it is not that type then let me have the wire colours going into the hazard switch and I will see if I can work it out for you.

Steve