A different bush???

[motul1974]

Hit an issue with one of the rear top arms.....one sides longer bush hole appears to be bigger than the other and so the bush is simy too small in diameter.

Is this normal, or is something else going on?

[phazed]

I thought they are all the same size?

[motul1974]

Not on mine for some reason, or something else is going wromg

[Steve_D]

Rear upper bush is longer but has a smaller bolt dia.
Front upper bush is shorter and has a larger bolt diameter.

Same both sides.

Steve

[motul1974]

Thanks, that's as I thought it would be. I'll go back to it again...

[motul1974]

Just rang Richard at RTC, were i got the outriggers and bushes from, turns out it's something he's come across before that there's a 27mm hole where it should be 26mm - he didnt know why it .Only option was a new arm!

Will the spending ever end?!?! lol

[motul1974]

Yes, I know that the two top bushes are different, but the problem I had was the wider top bush was actually two different diameter. 26mm and 27mm.....so somebodies messed with one side in the past.

Sorted now with a complete replacement arm.

[LeeHodges]

Sorry, misunderstood your post in that case.

[M3ax]

I misunderstood also. I thought the thread was about infidelity. As you were.

[motul1974]

...that stories on a 'different' site!