Air-Con fabrication-fittings

[DaveG]

I am installing air-con in my Griffith 500 using custom components and the standard Sandon compressor (TRS105). I have finished most of the work, but I am having trouble locating the standard pipe/hose fittings which connect to the compressor. The larger No:10 hose/pipe which connects to the fuel cooler/evaporator seems to be availble from Dom (Power Performance), but the other (left hand) No: 8 hose/pipe conector appears to be a TVR 'special'. - see snapshots below.




(sorry about the rotation!)

Can anyone a) enlighten me as to a source? or
b) does anyone have these parts for sale?
Any other advice is welcome.

[Steve_D]

Just found these.
https://www.ebay.com/itm/271678806972?epid=1401293...

Steve

[DaveG]

THanks Steve. However they are straight through connectors and you need 90 degree connectors as there is no room due to the wing-bulkhead. They must come out vertically as in the snapshots. Presunably on the Land Rover, P38 etc, they had plenty of room to fit standard straight through connectors.