Engine mount squeaks?
Discussion
Back and forth, sounds like gearbox mounts.
Jack the car up from the front and turn steering to full lock and poke your head inside the wheel arch and look to see where your exhaust manifold pipes sit in conjunction with the top Chassis main tubes on both sides.
If you have a gap of around 10 mm to tubes your engine mounts should be ok. Using a torch you can also check condition of engine and gearbox mounts.
Run the engine and get someone to Rev it from idle whilst someone observes engine/ gearbox rubber mounts looking for movement/ loose bolts.
Jack the car up from the front and turn steering to full lock and poke your head inside the wheel arch and look to see where your exhaust manifold pipes sit in conjunction with the top Chassis main tubes on both sides.
If you have a gap of around 10 mm to tubes your engine mounts should be ok. Using a torch you can also check condition of engine and gearbox mounts.
Run the engine and get someone to Rev it from idle whilst someone observes engine/ gearbox rubber mounts looking for movement/ loose bolts.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff