Overheating Issue
Overheating Issue
Author
Discussion

AndyC16

Original Poster:

54 posts

270 months

Tuesday 4th October 2005
quotequote all
Hi, have got a slight over heating issue with my 94 Chim.
Runs perfectly for first 20mins. Heats up nicely, fans kick on and off as needed. After 20mins the fans dont kick in and the temp guage shows overheating. If at this point i turn the car off then start it again (or put on ignition) the fans kick in straight away.

Many thanks for any ideas!?!

GreenV8S

31,017 posts

313 months

Tuesday 4th October 2005
quotequote all
Maybe the relay is on the way out, 20 minutes is about right for a failing relay to overheat and give up - and then come back to life when it's had a few minutes to cool down.

AndyC16

Original Poster:

54 posts

270 months

Tuesday 4th October 2005
quotequote all
Thanks. Any idea where i would find the relay?! Its just odd that when i turn off the car with the fan not working and then start it again immediately, the fans kick in again.....

GreenV8S

31,017 posts

313 months

Tuesday 4th October 2005
quotequote all
Yes it is a little odd, but still consistent with the theory that it is a relay fault. Relays will be in the fuse/relay panel in front of the passenger's feet.

richb

56,275 posts

313 months

Tuesday 4th October 2005
quotequote all
I had an intermittent otter switch it may be that? Wrongly I assumed that the switch either worked or not but after a few months of occasional overheating I worked out that it was deciding when to work somewhat randomly!

jellison

12,803 posts

306 months

Tuesday 4th October 2005
quotequote all
Has it still got orignial rubbish Lanie rad?

AndyC16

Original Poster:

54 posts

270 months

Wednesday 5th October 2005
quotequote all
Think it is the original rad.
I have had the rad reconditioned, new otter switch, new thermostat, new pipes. I hope its the relay because i cant think of anything else! (unless the new otter switch isnt working!)

jellison

12,803 posts

306 months

Wednesday 5th October 2005
quotequote all
Radtec for new rad - they are the nuts